Tag Archives: Screen Protectors

Screen Protectors blog posts | Our Photodon blog offers advice on ways to protect and improve your viewing experience on you device with protective solutions.

How to Successfully Install a Photodon® Screen Protector

December 14, 2022 | By Jenny Sockol

Now that you have your Photodon screen protector or privacy filter, are you feeling intimidated by installing it? The instructions included in your installation kit explain and show just about everything you need, but sometimes it's still helpful to have a little extra explanation. So that you can gather the extra knowledge for a successful screen protector or privacy filter installation, please keep reading.

Installation Steps

You can definitely install your screen protector or privacy filter with success. All you need to do is read the instructions, take your time, and possibly have some help. Again, it is to your advantage to read the instructions first, have patience, and enlist help if possible.

These installation videos will be of help as well:

How to install a Photodon screen protector on a laptop – YouTube
Photodon Screen Protector installation on a 27" Monitor – YouTube

1. Clean your installation area

If you have a vacuum with a soft brush head, use that attachment to carefully remove dust from the device screen and surrounding area. Then, use either the included microfiber cloth and Anti-Scratch cleaning spray, or the Zeiss wipes from your installation kit to clean the device screen and surrounding area. This will reduce the amount of dust and debris available to find their way under the screen protector during installation. You can continue with this cleaning process at any point during the installation.

2. Try the test piece that came with your order

This sample piece's purpose is to ensure you approve of the film type and behavior before installing the actual screen protector. First, pull back the bottom liner about an inch and then place that exposed adhesive on your screen. Second, use either your finger or the squeegee to help apply pressure and allow the test film to fully adhere onto your screen as you pull off the remainder of the back liner. You can use the squeegee to push out any remaining bubbles. Third, remove the front liner from the top of the test screen protector piece. Pull the orange sticker and use the squeegee if necessary to fully adhere the edges again.

Now you can try out the test screen protector. Get a feeling of what it looks and feels like on your screen. If you do not like it, do NOT unpackage your actual screen protector and contact us here at Photodon by emailing [email protected]. If you are pleased with the test piece, you can remove and discard it.

3. Verify the size of your screen protector will fit on your device screen

Now go ahead and take the screen protector out of its bag and hold it up to your screen. Ensure there's a slight gap between all four sides of the screen protector and the edges of your screen. That gap is supposed to be there so it is easier to install. If the screen protector does not fit, do NOT attempt to install it and contact us here at Photodon by emailing [email protected].

4. Clean your device screen and the screen protector

As before, use either the provided Anti-Scratch cleaning spray and microfiber cloth, or the Zeiss wipes, to remove dust and fingerprints from the device screen and your screen protector.

5. Begin with the bottom liner

Use the protruding clear tab to pull back the bottom liner about one to two inches. Line up that edge of the screen protector with the exposed adhesive to the edge of the device screen. Be sure the slight gap that you confirmed earlier is present so that the screen protector is properly centered on the screen.

6. Adhere the silicone backing to your device screen

Allow the edge of the exposed adhesive to touch and begin adhering to your device screen. If the screen protector does not make full contact on its own, you can push down on it to start the process. Now, while holding the screen protector in one hand, use the squeegee in your other hand to begin sealing the screen protector to your device screen. As you make progress, pull back more of the bottom liner to expose more of the silicone backing.

As you approach the end of the installation, look over the screen protector one last time to ensure there are no dust particles trapped underneath and that you are happy with the alignment. Remove the rest of the bottom liner to allow the screen protector to fully lay down on your device screen. To aid this, you can continue using the squeegee to adhere the screen protector into that last corner. Feel free to use that squeegee or your finger to seal down all the edges of the screen protector.

What to do if you see small bubbles during the installation process

If you notice small and completely clear bubbles during installation, do not worry about them and continue with the installation process. You can push out those small bubbles out to the nearest edge with the squeegee when you are done with the installation. See below if there is a speck in the bubble.

What to do if there is dust under the screen protector during the installation process

Small bubbles with a speck in the center indicate a dust particle under the screen protector that need to be removed. If you want, you can circle that dust speck with a marker right on that top liner in order to keep better track of it. You'll need to find the small white square of dust removal foam tape that came in your installation. Remove the liner on the tape to expose the adhesive. Next, pull back the screen protector past the speck and touch the dust removal foam tape to the dust particle. Note that dust normally sticks to the adhesive side of the screen protector.

At this point, it is a good idea to look for other specks before continuing with the installation. Gently wipe the screen with your microfiber cloth to remove any potential dust.

What to do if you see large bubbles during the installation process

If you notice big bubbles during installation, slowly lift up the screen protector far enough to remove the bubbles. Once the bubbles are gone, continue the process to continue applying the protector.

What to do if the screen protector is crooked during the installation process

In the event the screen protector's alignment is off, carefully remove it and start over.

7. Remove the top liner

Pull up and back on the orange sticker until the top liner is removed. Lastly, you might need to seal the edges of the screen protector again. If that is necessary, use the squeegee or your finger to do so.

Installation Kits

An installation kit is included with every screen protector or privacy filter order, and it contains everything you need for the installation process. Here is what is included with each of our kits:

Standard Installation Kit (MX2022)

Our standard installation kit is included with all screen protectors under 32 inches. You can also purchase one separately.

Deluxe Installation Kit (MX101)

Our deluxe installation kit comes free with all screen protectors 32 inches and bigger. You can also purchase one separately.

Mobile Installation Kit (MX102-M)

Our free mobile (in-dash) installation kit includes a microfiber pouch to keep in your glovebox or purse. You can also purchase one separately.

Privacy Filter Installation Kit

Our privacy filter installation kit is complimentary with each non-adhesive style privacy filter order.

Extra Installation Tips

Hopefully this information has proven helpful for you. As a result, you should be able to successfully install your screen protector. Everything you should need is in your installation kit. To clarify again, read your instructions, take your time, and have someone help you if possible.

Photodon employees are always happy and ready to help with any questions you may have about your screen protector installation. If needed, don't hesitate to contact us at 847-377-1185, M-F 9:00 am – 5:00 pm EST, or email us at [email protected].

Why are Photodon PET Screen Protectors Better Than Tempered Glass?

February 8, 2022 | By Jenny Sockol

What is PET film?

Polyethylene terephthalate is a high-performance polyester film known by its abbreviation of PET. Among many other qualities, PET film boasts strength, stability, low moisture absorption, retention of physical properties, and the ability to withstand sterilization.

Continue reading →

How to Choose a Photodon Screen Protective Film

September 24, 2021 | By Jenny Sockol

We get lots of questions about our different screen protective films and which one to order. We strive to have a lot of information on our main protective film page, but with so much information all in one place, it's hard to absorb it all! So let's address a question that is asked almost daily:

"Which type of film should I order?"

Continue reading →

3 Reasons Your Kids Need Blue Light Screen Protectors

February 5, 2021 | By Jolynn Paige

The need for online school and online socializing in order to keep safe during the COVID-19 pandemic has led to a steep increase in screen time for most children and teens. This information from a recent Fox News article confirms this fact: "…the group found that screen use rose to 7.7 hours per day from pre-pandemic estimates of 3.8 hours per day." With all of this additional screen time, children's eye health is at risk. The good news is blue light-cut screen protectors can help prevent macular degeneration, reduce eyestrain and headaches, and may even keep sleep patterns stable. But what is blue light and why can it have these negative effects on human health?

Continue reading →

We strive to earn your business for life!

January 14, 2021 | By Jolynn Paige

As a USA-based manufacturer of custom screen protectors, privacy filters, and other screen accessories, we're proud to say we've survived and thrived in today's global economy. We offer superior-quality materials at affordable prices with the best customer service in the industry. (Check out our A+ Better Business Bureau ratings and reviews on our website). Located in beautiful Traverse City, Michigan, we'll do whatever it takes to gain your business.

Continue reading →

Suprise! Made in the USA custom screen protectors!

December 28, 2020 | By Don Basch

Our Traverse City, Michigan-based business makes custom screen protectors by importing several kinds of screen protector and privacy filter material and then cutting, packaging, and branding it. We are capable of filling large, multi-piece industrial orders, and we are the best in the business when it comes to providing high-quality, reasonably priced solutions for our business-to-business partners. Check out what others have to say about us.

We specialize in custom screen protector services and custom kits, plus we are able to supply unique shapes and sizes to meet our customers' display protection needs. With no minimum order quantity, we will make generic labeled screen protectors and kits which our customers can sell directly to their customer base.

Some of our business clients will add screen protectors or privacy filters to their already top-selling products alone or in a kit form. Kits can include color printed or etched superior-quality promotional microfiber cloths, which can then be placed in a company's device packaging, thus adding value to their end customer. Continue reading →

Touch your Laptop Computer's Screen With Peace of Mind!

December 23, 2020 | By Jolynn Paige

There's no question about it: laptops with touchscreens are a fun and versatile way to get information. The un-fun part is when you're left with wear marks or scratches, and even irritating fingerprints and smudges left from touching your screen so much.

Whether you use your touchscreen in the workplace or at home, Photodon's high-quality, Touché brand screen protectors will block the abuse of everyday use.

Photodon carries many of the most popular touchscreens including screen protectors for HP, Acer, Dell, and Apple products. And the good news is, if we don't have the screen protector you're looking for, we'll be happy to custom cut one for you. Simply provide us the dimensions and we'll cut a film to your specifications.

Bulk Discounts

Photodon does a lot of business with large and small corporations, and we can offer substantial discounts to those who are seeking bulk pricing.

We are happy to help with any question you may have. If needed, please contact us at 847-377-1185, M-F 9:00am – 5:00pm EST, or email us at [email protected].

Continue reading →

9HO Screen Protectors: 9H Hardness Defined and Tested

July 8, 2020 | By Jolynn Paige

Photodon's highly scratch-resistant oleophobic 9HO screen protective film is a rockstar in Photodon’s film lineup. Not only is it one of the most scratch resistant films available on the market, it is extremely clear. It’s easy to clean, affordable and — unlike tempered glass — it's shatterproof.

But what exactly does 9H mean in terms of scratch resistance?

9H Explained:

There are many ways testing labs will evaluate the hardness of a given material. One common way is to test a surface with minerals of varying degrees of hardness to determine if it will scratch a surface. Another way is to use pencils that are on a hardness scale that ranges from 2H to 9H. The higher the number, the harder the lead.

The most commonly used pencils are 2H on the hardness scale — not very hard. You may notice that if you use much pressure on a #2 pencil tip, the tip will break easily. Many artists will use 9H pencils — the hardest pencil grade available — so their pencils don't break as they draw.

Photodon's 9H Hardness Test:

One way Photodon’s screen protectors were tested was by using pencil hardness methods as set forth by the highly reputable American Society for Testing and Materials (ASTM) International Standards. Photodon’s 9HO film surface was evaluated for its ability to withstand scratches using these graded pencils.

Continue reading →

Tag Archives: Screen Protectors

How to Successfully Install a Photodon® Screen Protector